Download Pixel OS Android 15 POCO X5 Pro 5G / Redmi Note 12 Pro Speed

Download Custom Rom Pixel OS Android 15 Xiaomi POCO X5 Pro 5G/Redmi Note 12 Pro Speed (redwood).

Installation

CLEAN FLASH WITH AOSP RECOVERY

1. Download the boot , dtbo and vendor_boot images from HERE. [all files are in zip file so kindly unzip that file.]

2. Connect To Pc

3. Reboot to fastboot ( press both power_button_key + vol_down_key ) and follow the steps as given below.

4. fastboot flash vendor_boot vendor_boot.img

5. fastboot flash dtbo dtbo.img

6. fastboot flash boot boot.img

7. fastboot reboot recovery

8. Select Wipe Data/factory Reset & Confirm

9. Select ‘apply Update’ From Adb

10. adb sideload Rom_Name.zip

11. Select Wipe Data/factory Reset & Confirm

12. After Installation Complete, Reboot System.

13. ( optional ). Reboot to recovery to sideload any add-ons ( e.g magisk, firmware, gapps etc )

DIRTY FLASH ( Without data format )

1. Reboot to recover by holding power button and volume up simultaneously

2. In the recovery menu select Apply update through ADB

3. adb sideload Rom_name*.zip ( or drag down the rom zip to cmd )

4. After installation complete, Reboot system.

Change partition slots ( optional )

• If your device does not change slot automatically, you can do it manually just follow the given steps.

• adb reboot bootloader

• fastboot getvar current-slot

• fastboot --set-active=b ( for eg. your current active slot is A so you would want your current slot to set be on B )

• fastboot reboot

Linux fastboot permission issue

Try using sudo $(which fastboot) instead of fastboot

for eg.

• sudo $(which fastboot) devices

• sudo $(which fastboot) flash vendor_boot vendor_boot.img

and so on.

How to flash rom with TWRP?

• Before doing the following you should be sure that your bootloader is unlocked.
• Download twrp-TheStrechh-RX.img from HERE, and platform tools from HERE Windows and Linux
• Extract platform tools in C:\ and copy boot.img in folder.
• Open terminal (CMD) in local folder and paste this command fastboot boot twrp-TheStrechh-R2.img , then click enter.
• Device boot in TWRP interface go to Advance and select Flash current TWRP and confirm. Done, you have TWRP installed fine, now can reboot system.

First option

• Download ROM, then go to Install -> select your ROM.zip -> Confirm.
• Back to TWRP Home, Go to wipe -> format data -> wipe cache from advanced wipe (For clean flashes only. If you are just updating, ignore this step).
• Back to TWRP Home, Go to reboot -> and change active slot. If active slot was A, select B. Or if active slot was B, select A. There is an indicator there shows active slot.
• Back to TWRP Home, go to Advanced -> flash current TWRP . If you forget this step, you’ll lose TWRP after reboot.
• Now reboot system and enjoy.

Second option

• Boot in TWRP -> format data -> yes
• Install the ROM with adb sideload -> adb sideload rom.zip in adb termianl.
• Back to TWRP Home, go to Advanced -> flash current TWRP . If you forget this step, you’ll lose TWRP after reboot.
• Reboot recovery and flash the gapps of your choice.
• Now reboot system and enjoy.

Changelog

• Advanced restart options
• One-shot brightness adjustment
• VPN support on hotspot
• Status bar icons manager
• ParanoidSense face unlock
• Option to hide SSID
• Network traffic indicator

Link

ROM

Firmware