Download Rom Project Elixir Android 14 Redmi Note 7 Lavender

Download Custom Rom Project Elixir android 14 Xiaomi redmi note 7 Lavender.

Installation Guide For Project Elixir

Installation Guide For Project Elixir on Redmi Note 7/7s (lavender)

Warning

Your warranty is void. Or valid, probably?
Project Elixir is not responsible for any damage you made to your device. You have been warned!
We are not responsible for anything that may happen to your phone by installing custom ROMs.
We are not responsible for anything that may happen to your phone by installing any kernels.
You do it at your own risk and take the responsibility upon yourself
You are not to blame Project Elixir or its respected developers for any of your loss.
Basic Notes for all users:
The provided instructions are for Project Elixir based on Android 14.
These will only work if you follow every section and step precisely
Do not continue after something fails! Contact in support group for help
The device must have an unlocked bootloader & has Platform Tools installed in pc.
If you are moving from any other Android version to Android 14, it is necessary to do CLEAN FLASH (Format Data)
Take a backup for safe side (If you are coming from older Android version or doing a clean flash)
For any queries or help related to Elixir, join our support group : Tap Here

Step 1: Download Required Files

Download the latest Android platform tools for Windows from the link below:
- Platform Tools Link (Windows): platform-tools-latest-windows.zip
Download the Recovery from the link below:
- Recovery Link [ For Android 14 ]: TWRP Recovery
Download the Project Elixir ROM for Redmi Note 7 Pro aka Violet from a reliable source.
- Project Elixir ROM Link: DOWNLOAD

Step 2: Install ADB and Boot into Fastboot Mode

Make sure you have ADB (Android Debug Bridge) installed on your computer.
Extract the downloaded platform-tools zip file on your computer.
Connect your device to your computer using a USB cable.
Open a command prompt (Windows) or terminal (macOS and Linux) on your computer.
Navigate to the location where you extracted the platform-tools.
Enter the following command to check if your device is connected and detected by ADB:

adb devices

If your device is listed, proceed to the next step. If not, make sure your device is connected properly and that USB debugging is enabled in the developer options.

Now, reboot your device into Fastboot Mode using the following command:

adb reboot bootloader

Step 3: Flash Recovery using Fastboot

Once your device is in Fastboot Mode, use the following command to check if Fastboot still detects your device:

fastboot devices

[!Note]
If your device is listed, you are ready to flash the TWRP Recovery.

Download the TWRP Recovery ZIP (.img file will be in zip) from the link provided in Step 1.
Place the downloaded TWRP Recovery image (.img file) in the same location as the platform-tools folder on your computer.
Now, flash the TWRP Recovery using the following command:

fastboot flash recovery recovery_file_name.img

[!Important] Replace recovery_file_name.img with the actual name of the TWRP Recovery image you downloaded if needed.

After flashing the recovery, use the following command to reboot your Recovery:

fastboot reboot recovery

Your device will reboot with Recovery installed.

Step 4: Wipe Data

In TWRP Recovery, use the touch screen or physical buttons to navigate.
Select “Wipe” from the main menu.
Wipe Data and Davlik & cache and then proceed to format data by typing yes. And reboot to recovery again.

Step 5: Flash Project Elixir ROM

Retrofit Dynamic Partitions (v4.1 and above versions) - Clean Flash

- Download the latest build (Need to clean flash)
- Take a backup
- Flash provided recovery Retrofit Supported Recovery
- Boot to Retrofit Supported Recovery
- Wipe Data by going to "Factory reset" section in recovery (only click Format data/factory reset)
- Wipe only Dalvik,cache and data (Only these 3 if coming from dynamic)
   * else wipe system too if coming from legacy
- Flash or sideload the ROM zip and Format data
- Reboot System

Retrofit Dynamic Partitions (v4.1 and above versions) - Dirty Flash (NOT SUPPORTED IF COMING FROM ANDROID 13)

- Boot to Retrofit Supported Recovery
- Wipe only Dalvik/cache
- Flash or sideload the ROM zip
- Reboot System

May Required Files:
Retrofit Supported Recovery : Tap Here for link

Note

Notes specific to device build
Firmware and Gapps are already included in zip no need to flash additionally
If you are coming from Android 12 or 13 to Android 14 then clean flash is compulsory and format data.
If you are encrypted do format Data before flashing build to avoid bugs.